Multi Stage Booster Pump
It's a high pressure large flow stainless steel housing multi stage booster pump
D-type horizontal multi-stage centrifugal pump is a single-suction multi-stage segmented centrifugal pump, which is used to transport clean water or other liquids with physical and chemical properties similar to water. The temperature of the liquid should not exceed 80 °C. It has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system.
D-type horizontal multi-stage pump is a multi-stage segmented type. Its suction port is located on the water inlet section, in a horizontal direction, and the discharge port is vertically upward on the water section.Its head can be increased or decreased according to the use needs.
The main parts of the D-type horizontal multistage pump are: water inlet section, middle section, water outlet section, impeller, guide wing baffle, water outlet section guide wing, shaft, sealing ring, balance ring, shaft sleeve, tail cover and bearing body.
multi stage pump
According to different purposes, D series can be divided into:
D-(350-550-750): Made of Industrail PP impellers, suitable for transporting clean water without solid particles or liquids with physical and chemical properties similar to clean water. The temperature of the transported medium is 0~+70ºC, the pump suction is horizontal, and the discharge is vertically upward.
D-1800-2200: Made of stainless steel impellers, suitable for transporting a wide variety of liquids and is the ideal solution for handling special fluids such as corrosive liquids and clean water. The temperature of the conveyed medium is 0~+100ºC, the pump suction is horizontal, and the discharge is vertically upward.
All the above types of pumps is Ideal for performing frequent and intermittent pumping operations, as pump priming steps at start-up are eliminated.
Features:
1. Advanced hydraulic model, high efficiency and wide performance range.
2. The pump runs smoothly and has low noise.
3. The shaft seal adopts soft packing seal or mechanical seal, the seal is safe and reliable, the structure is simple, and the maintenance is convenient and quick.
4.The shaft is a fully sealed structure, which ensures no contact with the medium, no rust, and long service life.
FAQ:
1.What information do you need to offer a quotation?
Liquid:
Pump Capacity: m³/h or L/S
Pump Head: M
pH:
Specific of gravity:
Voltage: V
Frequency: Hz
2.Are you the manufacturer or trading company?
We are real manufacturer for permanent magnet pumps and motors.
3.Can we pay a visit to your factory?
Yes.We warmly welcome you to visit our factory.
4.What is the MOQ?
There is no MOQ.
1 set of pump,or 1 piece of spare part is ok.
5.Do you accept OEM orders?
Yes.Send us the drawings,then we can produce for you.
Hot Tags: multi stage booster pump, China multi stage booster pump manufacturers, suppliers, factory, Self Priming Pump, Shield Circulation Pump, Water Pump For Farm Irrigation, Adjustable Speed Permanent Magnet Motor, Shielding Pump, 220v Synchronous Motor
Send Inquiry
