Self Priming Electric Pump
This self priming electric pump is applied to pumping such liquid which is clean, no solid matter or frictional matter, low viscous, noncorrosive, non- crystallizable, chemically neutral and close to water. With high pressure and big flow.
Features
1. Model: A-2200 self priming electric pump
2. Power: 2.2KW
3. Max flow: 8.0 ㎥/h
4. Max head: 70m
5. Pipe: 50mm
6. Suction: 9m
7. 100%copper wire, and automatic wiring.
8. Industrial PP impeller & stainless steel shaft
9. With high-speed punching, improve the efficiency and precision.
10. CNC precision automatic lathe for smoother shaft, our owner casting factory.
11. Strict test including high-pot testing of stator coil and whole pump, outgasing test and performance test, ect.
12. Anti-rust treatment castings.
One of the most common design methods to induce the priming process involves the following steps:
Creating a reservoir parallel to the utility line, with a volume equal to or greater than the amount of liquid needed to fill the suction line. This tank allows the pump to release air from the pump body and suction line during the priming cycle, replacing it with liquid from the tank that is mixed with the remaining air.
Insert a check valve in front of the pump so that filling operations do not have to be repeated each time the pump needs to be operated.
The "self-priming" capability of this type of centrifugal pump comes from the ability of the tank to hold the liquid after its initial priming.
|
Model |
Voltage |
Power |
Outlet Size |
Max Flow |
Max Head |
Max Suction |
|
A-2200 |
170-260/50 |
2200 |
50 |
8 |
70 |
9 |
Hot Tags: self priming electric pump, China self priming electric pump manufacturers, suppliers, factory, Shielded Booster Pump, Agricultural Irrigation Pump, Multistage Pump, Shield Circulation Pump, High Pressure Booster Pumps, Magnet Motor
Send Inquiry
